This guide walks you through the essential steps to safely install, power on, and control your robotic arm using the built-in Web App. It is written for first-time users and focuses on clarity and quick setup.

1. Mounting the Robotic Arm

The robotic arm shifts its center of gravity during motion. If it is placed loosely on a table, it may tip over during operation. For safety, always secure the arm before powering it on, and keep children and fragile objects away from the working area.

1.1 Mounting on a Desktop

Your standard kit includes two G-clamps for table installation.

• The clamps support table thicknesses from 7–50 mm.
• Ensure the table edge has enough lip for the clamp to grip.
• For best stability, place the two clamps as far apart as possible.

1.2 Mounting on a Mobile Platform

The arm provides several structural mounting points so you can integrate it into mobile robots or custom projects.

For integration examples and mounting dimensions, refer to the document “Integrating Into Your Own Project.”

(Sample customer integrations)

1.3 Safety Notes

• Keep the arm’s working range clear of people—especially children—and fragile items.
• Monitor the robot while operating; avoid long-term joint stalls or collisions.